Audio Processor & Amplifier

DAM-0808 8x8 Digital Audio Matrix Processor

Supports up to 8 fixed analog audio inputs. The processing module and sequence of each audio input channel can be self-defined based on the demands.
DSP capability：400 MIPS; 1.6 GFLOPS.
Definable UI for managing all audio channels via web browser, no compact disk required. It supports the configuration of max. 30 units and 8 users at the same time.
Equipped USB port to connect with PC to perform remote meeting and video capturing.
Supports ducker, AEC, AFC, ANS, AGC, ANC, AM, Gate Mixer, camera tracking, and other defined modules.
Equipped with matrix function to broadcast different audio sources to different zones.
Centralized control via RS-232, RS-485, and UDP: easily one click to control the power of A/V equipment and switch the audio source.

Supports up to 4 fixed analog audio inputs. The processing module and sequence of each audio input channel can be self-defined.
Analog output applies 24bit 256X sample rate convertor to perform greater dynamic range.
Definable UI for managing all audio channels via web browser, no compact disk required. It supports the configuration of max. 30 units and 8 users at the same time.
USB port to connect with PC to perform remote meeting and video capturing.
Supports AEC, AFC, ANS, AGC, and AM.
Equipped with matrix function to broadcast different audio sources to different zones.
Centralized control via RS-232, RS-485, and UDP: easily one click to control the power
of A/V equipment and switch the audio source.

Two channels model: 120W RMS/per channel.
Adaptable with 4-8 Ohm loads; suitable for small to medium sized meeting rooms.
Bridged mode 240W output for 70V or 100V loudspeakers (direct drive).
Power down after 15 minutes of no signal and comply with Energy Star Power consumption limits of < 0.5W in standby.
Selection for power-up mode, standby mode, and trigger mode.
Switch for High Pass Filter to reject the frequency below 80Hz, avoiding the damage to loudspeakers.
Equipped 12VDC terminal block for remote detection and control.
Short circuit & overheating protection without fan.
Optional accessory card slot for Dante receiver.

Rated Output: RMS 250W.
Speaker Output: 4Ω-16Ω/70V/100V.
Automatic temperature control to activate the cooling fan.
Recording Output: 2 sets.
5 zones +1 ALL CALL switch. 6 sets of circuit selection buttons.
Signal Input: MIC x 4 sets, AUX x 4 sets, and 8 sets of individual volume control buttons.
Equipped with 2 sets of MIC priority buttons for setting broadcasting priority.
1 set of EQ IN/EQ OUT port (able to connect with professional mixers or digital sound processors).
Built in with double electronic protection circuit and LED indicator for short circuit and overloading protection.

Output: RMS 400W
Speaker Output: 4~16Ω/70V/100V
Trigger contact to auto-activate the power
Temperature control by auto-operating cooling fan
Built-in electronic-protection circuit, short-circuit and overloading protection signal light
Adjustable volume control output and double volume output LED indicator